High Pressure Impregnation System

Product Impregnation system

• High pressure reactors • Pressures to 45,000 psi (3,104 bar)
• Temperatures to 1,000°F (538°C)
• Inside Diameters to 45" (1143 mm) and Lengths to 50 Feet (13.7 Meters). Specific sizes determined for each application

• Various Closures Available Depending on Process Requirements
• Metal or ceramic crucibles for high temperature applications

| Read more Product Information |

Low Density Polyethylene (LDPE) Vessels

Production size Polyethylene Reactors 

• Typical operating pressures of 30,000 to 45,000 psi (2,068 to 3,103 bar) other pressures availabl
• Typical Operating Temperatures to 600°F (316°C) other temperatures available

• 15 to 27" (381 to 686 mm) Inside Diameter and 17 to 24 Feet (4.65 to 6.56 Meters) Inside Length are typical other sizes are available

• Double ended configuration
• Economical threadless split clamp closure with metal "D" ring or wave ring seal

| Read more Product Information |

Corrosion Test System

Corrosion Test Sytsem 

• Operating Pressures from 2,000 - 10,000 psi typical (138 - 690 bar). Higher pressures available
• Temperatures to 900°F (482°C)

• Standard size: 5 - 24" (127 - 610 mm) inside diameter/ 2 - 20' ( .61 - 6.1 Meters) inside length, special sizes are available

• Flexitallic gasket or metal seals are standard

| Read more Product Information |

Hydrothermal/Crystal Growth Vessel

Designed for crystal growth or hydrothermal condition replication

• Operating pressures of 12,000 to 30,000 psi (827 to 2,068 bar)
• Temperature to 750°F (399°C)

• Standard sizes range from 8 to 24" ID (203 to 610 mm) & for 96 to 288" IL (2,438 to 7,315 mm) Special sizes are available

• High purity metal liners for high quality crystal growth available

| Read more Product Information |

Down Hole Simulation System

System designed to simulate deep hole geological conditions

• Operating Pressures to 40,000 psi (2,759 bar) and temperatures to 800°F (427°C)
• Diameters up to 20" + with lengths to meet requirements

• Single or Double Ended closure configuration

• Closure type dependent on pressure and temperature of application

| Read more Product Information |

Core Dissolving/Removal System

Core Disolving/Removal System 

• Operating temperatures up to 450°F (232°C)
• Operating Pressures to 500 psi (35 bar) with higher pressures available upon request

• Sizes to 125 gallons (473 Liters)

• Quick opening closures

| Read more Product Information |

Subsea Simulation Vessel

Pressure vessels designed to withstand subsea conditions

• Operating Pressures to 40,000 psi (2,759 bar) and Temperatures to 800°F (427°C)
• Diameters up to 20" + with Lengths to meet requirements

• Single or double ended configuration

• Closure type dependent on pressure and temperature requirements

| Read more Product Information |

Agency Approvals

ASME code, PED, CE, CRN & ISO certification.

• AED Design practices conform to all requirements of ASME Code, Section VIII, Division 1, 2 or 3.
• A Professional Engineer signs off ASME code calculations prior to submission to the code inspector, when required.

• The Engineering Department utilizes linear and non-linear Finite Element Analysis as part of many pressure vessel designs

• European compliance is accomplished by designing in accordance with the CE regulations and the Pressure Equipment Directive (PED) 97/23/EC, modules A1, D1, H, & H1.

| Read more Product Information |